If your computer is getting stuck on "Getting Windows ready, Don't turn off your computer" as you restart your computer, then you need to read this article to the end.
Here, in this article, we will talk about the causes of the Windows 10 Stuck error and give you various ways in which you can fix it.
The Windows 10 Stuck
The Windows Stuck problem is quite common on Windows 10 and Windows 8. The problem was faced by many users on their Surface Pro 4 system
Getting Windows ready stuck is a common problem faced by Windows 10 and Windows 8 users. Many users encountered this error in their Surface Pro 4 system. It shows the error message Getting Windows ready. Don’t turn off your computer.
There are different ways in which the error appears:
- Windows 10 ready restarting loop/infinite loop/update loop/boot loop
- Windows 10 system install stuck at getting ready
- Getting Windows ready after every restart
- Windows 10 update stuck on getting things ready
These are a few of the alterations of the same Getting Windows Ready stuck error. We have a few fixes for you, if you are going through the same problem.
There are times when the Getting Windows Ready stuck error is fixed by a simple restart of the computer, but then there are also other times when you have to use some of the fixes stated below:
1. Wait for Some Time (2-3 hours at least )
This advice has been given by Microsoft's support technician so you need to follow this and be patient when you are getting the Getting Windows Ready stuck error.
Sometimes it might take a while for your system to finish the jobs if the computer is downloading and installing files or might be dealing with some background tasks.
In this case, the first thing that you need to do is wait at least for 2-3 hours and then if it is not still fixed, then follow the next solutions.
2. Power Reset Your PC After Shutting It Down
This solution has worked for many users to solve the Getting Windows Ready stuck error. Here, you just have to clear the entire information in the computer memory without damaging the data, which can be done by power resetting your computer.
Follow the steps to do so:
- Turn off the computer first.
- Then, just unplug all the peripherals that are attached to your system (like USB flash drive, headphones, etc.)
- Then press and hold the power button of your computer for 30 seconds.
- Then just unplug the power cable from your PC. Unplug the battery too, if it's possible.
- Then put in the power cable back to the computer and reinsert the laptop battery
- Then turn on your computer again.
By now the Getting Windows Ready stuck error must be resolved. If not, follow the next step.
3. Run System File Checker
If the solution mentioned above doesn't work out for you, then you can also try running the System File Checker tool.
You might be getting the error due to the corrupted Windows system files and this could be the reason for the Getting Windows Ready stuck error.
To run the SFC scan follow the following steps:
- You have to first insert a USB drive or an installation disc into your Windows 10 PC and restart your system from the drive.
- Then you can move to Repair your computer, then get in Choose an option screen, and then selectTroubleshoot.
- Then, on the Advanced options page click on Command Prompt
- And type the sfc /scan now as the cmd window is opened and hit Enter.
- Then wait for the scanning process to finish.
After the scanning process is finished, restart your computer.
4. Delete the Problematic Files and Uninstall Recently Installed apps
The cause for the error could also be the recent software that you might have installed.
If the software isn't compatible with your Windows 10 OS, this could be the cause of the problem.
You can try running the third party installer as it removes the software completely without leaving any registry entries or junk files.
If there are issues caused by the problematic files, then you can try deleting the files by following the given steps:
- First, restart the computer then you will find the Windows Boot Options page.
- Then, in the Windows Boot Options menu, just select Troubleshoot, then Advanced Options, and then Command Prompt.
- Then, type the command C: cd Windows\System32\LogFiles\Srt. SrtTrail.txt in the command prompt and hit Enter
- You might see Boot critical file c:\windows\system32\drivers\vsock.sys is corrupt,
- Then move to the specified location use using the Command Prompt and type the delete command for deleting the problematic file.
5. Uninstall Recent Update
Various updates are randomly released on Microsoft to improve the Windows 10 performance but the incorrect Windows update might confuse the Windows 10 to get stuck in the update loop.
And you should uninstall the update in this case.
Follow the steps given:
- Restart the PC or laptop by holding the Shift key. Then, open the Start Menu, then click on the Power button to open Power options
- Then, as you press and hold the shift key and click, Windows will automatically start in Advanced boot options
- Click Startup Settings and press the F4 key so that the system starts in Safe Mode.
- Now right-click Start in Windows 10 Safe Mode, then go to Control Panel and then go to Programs and Features.
- Next click View installed update in the left panel and choose the recently installed updates and uninstall them one by one.
- Finally, restart your computer and check if the error still remains.
6. Perform a Startup Repair
To fix your computer is stuck in getting Windows ready every reboot, performing the Windows startup repair may work for you.
- First, enter the Windows Recovery Environment (WinRE) with the Windows installation disc.
- Move to WinRE and then go to the Advanced options, then select Startup Repair: Fix problems that keep Windows from loading.
- Then you just wait for the repair process to finish.
Check if the error still remains and if it does, you have to perform a System Restore.
7. Perform a System Restore
You are with the final option of running the System Restore if none of the other options worked for you.
Follow the given steps:
- Boot in Safe Mode first.
- Press Windows + R keys then type rstrui.exe in the Run box and hit Enter
- Then select roll back to the earlier time when your computer was working well and click Next
- Wait for the whole process to finish.
Now your error must be resolved.
SIMPLE & BEST FIX:
If the PC stuck on getting Windows ready, Don’t turn off your computer screen is still causing you trouble, then you can just try the PC Repair tool.
This tool can detect just by scanning as it is an advanced multifunctional tool. It can fix the PC stuck on getting Windows ready, Don’t turn off your computer screen easily.
So it might be a good option to get the tool.
So, this was all there was to the PC stuck on getting Windows ready, Don’t turn off your computer screen error.
Tell us your experience with it in the comments.
All the best!